Polymer 80 Glock Build Rear Rail Fixes
Articles, Blog

Polymer 80 Glock Build Rear Rail Fixes

November 13, 2019


23 Comments

  • Reply Tactical Reviews November 6, 2019 at 9:28 pm

    I'm glad that you keep making this videos cuss this rear rail module is such a big part of why we get so many problems. My first build all I did was drill the holes, take down the tabs, put the parts together and boom 30 minutes I was done! But then I'll have weeks and weeks of malfunctioning. Now I take my time, I do one part at a time, I check, double check and triple check before even putting it together. So now the issues I get are no longer my mistakes but manufacturers mistakes and thanks to you I know how to fix them properly 👍

  • Reply Dale V November 6, 2019 at 9:35 pm

    I built two. Both had bad rear rail issues. And one had locking block issues. Poor quality from the manufacturer. I followed your videos to build them. Great videos. P80 needs to rethink their poor rear rail QC.
    But is a great product otherwise.

  • Reply Kramer Britton November 6, 2019 at 9:41 pm

    So much helpful information, after watching all of your videos I’m ready to “pull the trigger” on my first P80. Pretty sure I can do it blindfolded because of your videos! 😂 Keep up the great content. I really appreciate your time, dedication, and quality of work put into these videos!

  • Reply Paul Colletti November 6, 2019 at 9:58 pm

    One day I would like to build one of these they look like it would be fun to build one.

  • Reply Paul Colletti November 6, 2019 at 10:12 pm

    I watch all your videos & just learning. Very good detail!! Good job brother

  • Reply Vincent Paretti November 6, 2019 at 10:16 pm

    Great info as always M.G.B. Priceless stuff!

  • Reply 1776ERS November 6, 2019 at 10:25 pm

    This stuff is priceless!!!

  • Reply Ed Pereira November 6, 2019 at 10:35 pm

    Boom! Hit it out of the park! Thank you very much for putting this together. I learned alot!

  • Reply Shaun Cohen November 6, 2019 at 10:51 pm

    Watched the MGB videos multiple times before I did my first P80 last friday so far I have 200 rounds through it without a single issue. Thank you and keep it up!

  • Reply Hi November 7, 2019 at 12:11 am

    When I point my P80 towards the sky, keeping the trigger pulled, and run the slide back slowly it stops about 1/2 inch before full battery.

  • Reply MarineGunBuilder November 7, 2019 at 12:21 am

    Freedom Protectors – Subscribe to the channel here:
    http://www.youtube.com/c/MarineGunBuilder/?sub_confirmation=1
    The playlist is updated every couple of days in this series.
    You can view the playlist here: https://www.youtube.com/playlist?list=PLdCqeWPMf87zjJB6ofpD_oHq3jwLItpXm

  • Reply Rodney Peters November 7, 2019 at 12:56 am

    top notch video, great general gunsithing info and perfect Glock to P80 info!

  • Reply Daequan Shambley November 7, 2019 at 2:10 am

    Hey guys I'm new to the polymer 80,I have a concern as to why my slide locks and I'm not riding on the slide stop? With my thumb. Ive even switched my position with my hands and even made sure I wasn't riding the stop, and I'm having this reoccurring issue. I've watched a lot of your videos and I've learned a lot, which helps me with other pistol builds. I honestly need some advice if there's anything I'm doing wrong, please from one gun guy to another. I need some advice lol 😂.

  • Reply oscar hernandez November 7, 2019 at 3:54 am

    very well explained , great work! thanks a lot for sharing your knowledge is going to be very helpful when i do my g19 build! question: any experience with 80pbuilder products ? thinking of buying a g19 triad full build kit.

  • Reply B D November 7, 2019 at 3:56 am

    correct me if I'm wrong, but I've a feeling there can be a connection between reshaping the arch, and the alignment of the pin holes with the frame. Perhaps, if any smoothing of the arch is done, it'd be wise to do it before checking that pin fit?

  • Reply 1776ERS November 7, 2019 at 4:47 am

    A friend of mine who is a gunsmith shared something with me that is done after everything you showed here is completed but before polishing the rails. It’s a technique used for mating two metal surfaces for a perfect match with each other. It can be helpful when dealing with paint in the channel of the slide where the rails ride when having a hard time getting a smooth action due to the thickness of the rail & tight slide channel.

  • Reply F Mur November 7, 2019 at 1:57 pm

    Speaking for my own OCD, I do not find you detailed enough……J/K. Your info is 1st class, clear and very easy to follow. Once snowed in here in New England, I have basement project waiting for me to start. Keep the detailed info coming.

  • Reply Paul Lo Cicero November 8, 2019 at 1:27 am

    Great review as always MGB! Really happy I saw this video, too.

  • Reply Philburr November 8, 2019 at 12:10 pm

    I wish I would have seen this on my first build , had a lot of trouble and it was all because of the rear rail , excellent video

  • Reply costa nicolaidis November 9, 2019 at 8:52 am

    I owned my first glock about 27 years ago and for the love of God i could never understand why they didn't make a ''B'' frame ie. with a 1911 angle backstrap like the polymer 80. Through the years gunsmiths and people where modifying their frames and Glock was and still is in the dark!!!! A lot of people i met were not that happy with the grip angle. When i placed a 1911 in their hands you should have seen the look on their faces, Priceless. I think glock lost a lot of sales and their customer PR ( public relations) sucked. Give the customer what he wants. Great job buddy your vids are great. What would you say or do you know the lifespan of these frames?? Basically i've heard about glock frames lasting thousands and thousands of rounds, What is the most you heard of the polymer 80 has done?

  • Reply Greg Mauchline November 9, 2019 at 10:22 pm

    I guess I was lucky with my build, but I had zero issues with the rails. Good video though.

  • Reply D&S November 13, 2019 at 3:51 pm

    I just got my ar15 polymer from ep armory that I ordered on the 21st.I got a email from them saying my order was canceled but no refund and still no contact. I was able to get a personal phone # of one of there employees from some fishing around on social media.People love to put there personal information on social media.LOL But I got in contact with them and there didn't care anything about my order just how I got that number.long story short I got my order and wow never again.

  • Reply sancoffsr November 13, 2019 at 9:25 pm

    Great video very informational you were suggested to me from P80

  • Leave a Reply